Thixotropic agent D772

Application system: Mainly used for water-based heavy-duty anti-corrosion, wood paint, automobile and industrial coatings. Suitable for water-based polyurethane, alkyd, Polyester and epoxy systems. The three-dimensional spatial network structure formed by the product solves the flow problem during the coating construction process. Hanging problem, and can prevent the settlement problem of heavy powder. Features: PAMID D772 is a high-performance anti-sag additive for water-based systems. Excellent anti-settling and anti-sag performance.

Commodity name： Thixotropic agent D772

Category:

Product Center

Phone:

Details

PAMID D772
Water-based polyamide anti-sag agent product manual
Application system:
Mainly used for water-based heavy-duty anti-corrosion, wood paint, automobile and industrial coatings. Suitable for water-based polyurethane, alkyd,
Polyester and epoxy systems. The three-dimensional spatial network structure formed by the product solves the flow problem during the coating construction process.
Hanging problem, and can prevent the settlement problem of heavy powder.
Features:
PAMID D772 is a high-performance anti-sag additive for water-based systems. Excellent anti-settling and anti-sag
performance.
Specific performance:
1. Prevent the settling problem of water-based paint or ink
2. Good moisture resistance
3. The arrangement of effect pigments such as silver powder and pearlescence has a certain effect
4. Good shear thinning performance, mainly solving the problems of sagging and settling under low viscosity
Physical properties:
Appearance: light yellow liquid
Active ingredients: >12.5%
Acid value: 6-10
Adding amount: 1.0-3.0% of the total formula amount
How to use:
PAMID D772 is a liquid water-based polyamide wax that does not require activation or pre-dispersion before use and can be used in paint making.
It can be added directly to the front or rear section. It is recommended that the dispersion speed should be controlled above 800rpm. For the need to put the
When adding the product to the water-based epoxy emulsion, it is appropriate to pre-mix PAMID D772 with part of the epoxy emulsion in the formula.
Mix at a ratio of 1:2 and disperse at a high speed above 1200rpm for 15 minutes. Add to the main formula after even dispersion.
For complex formulations and application conditions, we strongly recommend rigorous testing prior to use. pH value
The D772's better performance is evident around 7 - 9.

Storage temperature: A dry place between 5°C and 30°C.
Shelf life: one year.
Note: Avoid direct contact with sunlight.
The thixotropy of D772 is based on hydrogen bonding. Due to differences in storage time and temperature, the characteristic viscosity will be different.
same. Differences in viscosity between batches are normal and do not affect the use effect.