Disuper S760

Application systems： Well suitable for producing water-based ink. Specially designed for water-based flexo printing, it can disperse lake pigments such as 57:1 and 49:1 without gelling after long-term storage. Product features： Disuper S760 is a new generation of composite polymer dispersant. It can be used to disperse and stabilize organic pigments, especially lake pigments (57:1, 49:1). It is recommended for the dispersion of red, yellow and blue.

Commodity name： Disuper S760

Category:

Product Center

Phone:

Details

Application systems：

Well suitable for producing water-based ink. Specially designed for water-based flexo printing, it can disperse lake pigments such as 57:1 and 49:1 without gelling after long-term storage.

Product features：

Disuper S760 is a new generation of composite polymer dispersant. It can be used to disperse and stabilize organic pigments, especially lake pigments (57:1, 49:1). It is recommended for the dispersion of red, yellow and blue.

Specific Performance：

1. Prevent red ink from gelling during storage and resistance to alcohol and thinners.

2.Quickly and fully wet the pigment particles

3.Shorten grinding time and improve tinting strength and gloss.

4.Does not contain any organic solvents

5.Reduce the viscosity of the dispersion system and improve the rheological properties of the dispersion system

6.Recommended for resin-containing grinding

Physical properties：

Appearance: light yellow clear liquid

PH value (1% aqueous solution): 8-9.5

Density: 1.06g/cm3

Non-volatile components: ≧40% Solvent: deionized water

Dosage：

8-24% - organic pigment

Instructions:

Added during the pigment dispersion stage; usually dispersed into water for pre-dispersion, and finally stirred to add the pigment

Storage temperature:

Between 5-30°C, in sealed containers.

Shelf life: 1 year

Precautions：

See the Safety Data Sheet for additional safety information.

Please refer to the corresponding Safety Data Sheet.

The information contained in this document is based on trials carried out by our technical department and data selected from literature, but shall in no event be held to constitute or imply any warranty, undertaking, expressed or implied commitment from our part. Our formal specifications define the limit of our commitment. No liability whatsoever can be accepted by our company with regard to the handling, processing or use of the product or products concerned which must in all cases be employed in accordance with all relevant laws and/or regulations in force in the country or countries concerned.