PAMID D760

Application system: PAMID D760 for water-based paints, inks and adhesives; PAMID D710 for all solvent-based systems (e.g., acrylic/Melamine, PU, Epoxy, tar/Epoxy, Chlorinated rubber, Vinyl, Unsaturated resin).Product features: PAMID D760 is a water-based polyurethane rheological agent (medium shear thickening) with excellent anti-settling/anti-sagging and no gloss impact; PAMID D710 is a solvent-based rheological agent for anti-settling and thixotropic effects.

Commodity name： PAMID D760

Category:

Product Center

Phone:

Details

Products information:

PAMID D760 is a polyurethane type rheological agent ,that used in water-based system, medium shear thickening. The anti-settlement and anti-sagging properties of PAMID D760 are excellent. PAMID D760 apply to water-based paints, ink and adhesive system.

The performance benefits of this product are:
1. Excellent Anti-settlement performance.
2. No influence on the gloss.
3. Very good anti-sagging properties.
Physical Properties:

Appearance:      White liquid

PH :              6.5-7.5

Density g/cm³:    1.02g/cm³

Active ingredient: >20%

Applications:

PAMID D710 can be applied to all solvent-based system, such as acrylic/Melamine, PU coating, Epoxy, tar/ Epoxy, Chlorinated rubber, Vinyl or Unsaturated resin system.

Recommended Amounts :

Anti-settling:       0.2-0.5%

Thixotropic effect:  0.5-2%

Usage：

Don’t destroy the primary particle to keep a certain activity when dispersing with a certain shear force. If you require better appearance ,please make masterbatch pregel in binder an solvent, (D710 15%/solvent 65 %/ resin 30%,high speed dispersion, particle size <20µm)

Precautions For Storage:

Please store at the dry place at 5-30℃. Under the condition of avoiding direct contact with the sun, PAMID D710 can be stored for two year.

Precautions For Use:

Please refer to the MSDS for other security information.

Please see the Safety Data Sheet for additional safety information.

The information contained in this document is based on trials carried out by our technical department and data selected from literature, but shall in no event be held to constitute or imply any warranty, undertaking, expressed or implied commitment on our part. Our formal specifications define the limit of our commitment. No liability whatsoever can be accepted by our company with regard to the handling, processing, or use of the product or products concerned which must in all cases be employed in accordance with all relevant laws and/or regulations in force in the country or countries concerned.