Hyperlev-F39

Application system: Suitable for water-based systems including water-based pigments, coatings, latex paints, water-based inks and neutral inks, also applicable to solvent-free systems.Product features: Hyperlev F39 is a special silicone polymer with integrated wetting, anti-crater and defoaming functions, which reduces static and dynamic surface tension, enhances substrate wetting (especially low surface tension substrates), and improves leveling, gloss and surface smoothness.

Commodity name： Hyperlev-F39

Category:

Product Center

WETTING&LEVELING AGENTS

Phone:

Details

Product information：

Used in water-based coatings.

Features:

Hyperlev F39 is a special silicone polymer. It combines wetting, anti-crater and defoaming functions in one product. It can Improves substrate wetting by drastically reducing the static and dynamic surface tension of the coating. It also can Improve leveling and gloss,especially substrates with low surface tension, such as silicone glue, release agents, etc.

Specific performance:

1. Improve anti-pin hole performance and good defoaming performance

2. Very good wetting ability for substrates and powders

3. Improve leveling and surface smoothness

4. Reduce dynamic surface tension and static surface tension at the same time

Physical properties：

Appearance: Light amber transparent oily liquid

Surface tension: 25℃@mN/m:19.0~22.0

Active ingredient content: >99%

Application：

It can be added at any stage in the production process, including let-down stage . In order to facilitate the addition, the additive can be diluted with a suitable solvent first.

For complex formulations and application conditions, we strongly recommend rigorous testing prior to use.

Dosage recommended:

Water-based systems (water-based pigments, coatings, latex paints, water-based inks, neutral inks): 0.1~0.5% of the total formulation

Solvent-free system: 0.3~0.5% of the total formulation.

Instructions ：

Can be added at any stage of the production process. In order to facilitate the addition, the additive can be diluted with a suitable solvent first.

For complex formulations and application conditions, we strongly recommend rigorous testing prior to use.

Storage temperature:

A dry place between 5°C and 30°C。Away from direct sunlight.

Shelf life:

1 year

Precautions:

It is recommended that the entire system be evaluated for long-term storage. See the Safety Data Sheet for additional safety information

The information contained in this document is based on trials carried out by our technical department and data selected from literature, but shall in no event be held to constitute or imply any warranty, undertaking, expressed or implied commitment on our part. Our formal specifications define the limit of our commitment. No liability whatsoever can be accepted by our company with regard to the handling, processing, or use of the product or products concerned which must in all cases be employed in accordance with all relevant laws and/or regulations in force in the country or countries concerned.