Hyperlev F100

Application system: Suitable for a wide range of solvent-based coating systems, especially coil coatings, can coatings, general industry and automotive OEM. Product features: Hyperlev F100 is a high-performance polyester-based flow and levelling agent with colourless clear liquid appearance and ≥90% non-volatile content, enhancing wetting and film smoothness, with excellent resin compatibility and pigment dispersion improvement.

Commodity name： Hyperlev F100

Category:

Product Center

WETTING&LEVELING AGENTS

Phone:

Details

Product information：

Hyperlev F100 is suitable for use in a wide range of solvent based coating systems and applications: Coil coatings、Can coatings 、General industry 、Automotive OEM

Features:

Hyperlev F100 is a high performance polyester based flow and levelling agent for the control of coating surface properties. The results of these enhancements are smoother films with fewer imperfections and a superior overall appearance when compared with the unmodified coating. Hyperlev-F100 can be added to coating formulations prior to, or during, the pigment dispersion stage; the presence of polyester flow and levelling agents often results in improved pigment dispersion.

Specific performance:

1. Enhances substrate wetting. flow and levelling

2. Produces smoother films with fewer defects

3. Excellent compatibility with polyester resin

4.Suitable for most coating systems alkyd 、polyacrylate、polyester and epoxy .

5.100% active

Physical properties：

Colour：Colourless

Appearance:Clear liquid

Density at 25°C (77°F), g/cm³ :1.06

Non-volatile content, % @ 150°C (ISO 3251)：≥90%

Dosage recommended:

Generally 0.1 – 2.0 % based on total formulation depending on the application.

Storage temperature:

should be stored in the original containers in a dry place at temperatures between 5°C (41°F) and 30°C (86°F). Avoid exposure to direct sunlight or frost. Under these conditions the product may be stored for up to 12 months.

.

Shelf life:

2 years

Precautions:

It is recommended that the entire system be evaluated for long-term storage. See the Safety Data Sheet for additional safety information

The information contained in this document is based on trials carried out by our technical department and data selected from literature, but shall in no event be held to constitute or imply any warranty, undertaking, expressed or implied commitment on our part. Our formal specifications define the limit of our commitment. No liability whatsoever can be accepted by our company with regard to the handling, processing, or use of the product or products concerned which must in all cases be employed in accordance with all relevant laws and/or regulations in force in the country or countries concerned.