Why Doesn’t Lower Surface Tension Guarantee Better Coating Leveling?
Release time:
2026-08-14
Coating Appearance Depends on the Balance Between Wetting, Flow, and Film Formation
In industrial coating applications, surface appearance is one of the key indicators for evaluating final coating performance. Automotive OEM coatings, refinish coatings, coil coatings, wood coatings, protective coatings, and electronic coatings all require excellent surface smoothness, gloss, and visual appearance.
However, achieving a high-quality coating surface requires more than simply improving flowability. During the coating process, the wet film undergoes multiple dynamic stages, including substrate wetting, surface flow, solvent evaporation, and curing. Any imbalance during these processes may lead to common surface defects such as orange peel, craters, pinholes, insufficient gloss, and poor film fullness.
From a formulation perspective, these defects are often related to the interaction between surface tension, additive migration, resin compatibility, and flow recovery behavior. Therefore, effective leveling control requires maintaining a balance between rapid surface relaxation and sufficient film stability.
A suitable flow additive should not only improve wet-film spreading but also maintain compatibility with the coating system, minimize surface defects, and support consistent film formation.

Understanding Surface Defects During Coating Film Formation
The formation of coating defects is closely associated with uneven surface tension distribution and insufficient flow recovery.
A coating formulation typically contains resins, solvents, pigments, fillers, and functional additives. Since different components have different surface tension characteristics, localized surface tension differences may occur during film formation. These differences can generate surface tension gradients, resulting in uneven material movement.
When substrate wetting is insufficient, defects such as craters, fish eyes, and incomplete surface coverage may appear. When the wet film lacks adequate flow recovery capability, application marks, orange peel appearance, and reduced surface smoothness may remain after curing.
Therefore, leveling performance is not simply determined by reducing viscosity or increasing mobility. Instead, it depends on controlling interfacial behavior throughout the coating formation process.
Limitations of Conventional Flow Control Approaches
In practical formulation development, different types of flow additives are often selected according to specific coating requirements.
Traditional polyester flow additives can provide good leveling performance but may require longer flow time depending on the formulation. Silicone-based additives can effectively reduce surface tension but may introduce concerns related to compatibility, recoating performance, or adhesion in certain systems. Fluorinated acrylic additives generally provide strong surface tension reduction, but their influence on film fullness and compatibility needs to be carefully considered.
Therefore, the challenge for modern coating formulations is not simply achieving lower surface tension. The objective is to develop a balanced additive system that provides effective substrate wetting, controlled surface migration, good compatibility, and stable film formation.
Molecular Design Principles of Flow Additives
The performance of a flow additive is strongly related to its molecular structure and interaction with the coating system.
An effective flow additive generally requires two key functions: surface activity and compatibility with the resin matrix.
Surface-active segments can migrate toward the coating surface, reducing surface tension differences and improving wet-film spreading. Meanwhile, compatible polymer segments help maintain stability within the coating matrix and reduce negative effects on transparency, adhesion, and overall film properties.
For high-performance coatings, the molecular structure needs to achieve a controlled balance. Excessive surface activity may cause compatibility issues, while insufficient surface migration may limit leveling efficiency.
Therefore, the design of advanced flow additives focuses on achieving controlled migration behavior rather than simply maximizing surface tension reduction.

Key Factors Affecting Leveling Performance
The final leveling performance of a coating system depends not only on the flow additive itself but also on the overall formulation design.
The resin system plays an important role because different resin structures exhibit different compatibility requirements. Polyurethane, polyester, alkyd, epoxy, acrylic, and amino resin systems may require different additive structures to achieve optimum performance.
The solvent system also influences additive migration and film formation. Fast-evaporating solvents may shorten the leveling window, while slower evaporation can affect production efficiency and curing behavior.
In addition, pigment and filler loading, applied film thickness, curing temperature, and substrate condition can influence the final surface appearance.
Therefore, optimizing leveling performance requires selecting an additive that matches the complete formulation environment rather than simply increasing additive dosage.
Fluorine-Modified Polyester Flow Additives for Balanced Surface Control
Based on the increasing requirements for coating appearance and surface performance, fluorine-modified polyester flow additives have been developed to address surface defects during coating film formation.
These additives combine fluorine-containing segments with polyester structures to achieve a balance between surface tension adjustment and compatibility with coating systems. The fluorinated segments contribute to surface tension regulation and improved substrate wetting, while the polyester backbone provides compatibility with different resin systems and helps maintain coating stability.
Unlike approaches that rely solely on reducing surface tension, this molecular design focuses on controlling additive migration behavior and maintaining formulation balance. By optimizing the interaction between surface activity and compatibility, the additive system can support improved wetting, flow recovery, and film formation without negatively affecting transparency, adhesion, or overall coating stability.
Hyperlev F103, developed based on this design concept, is a fluorine-modified polyester flow additive suitable for various industrial coating systems, including polyester-amino baking coatings, polyurethane acrylic coatings, polyurethane alkyd coatings, and solvent-based epoxy systems.
Application Evaluation of Flow Performance
To evaluate the practical performance of this flow technology, compatibility and leveling tests were conducted in several industrial coating systems, including 1K polyester-amino baking coatings, 2K polyurethane acrylic coatings, 2K polyurethane alkyd coatings, and solvent-based amine-cured epoxy coatings.
Comparison of the compatibility of 1K polyester amino high-temperature baking varnish samples in cups for each solution

BLANK(Left) F103(Middle)COMPETITOR(Right)
Comparison of Compatibility of 2K PU Acrylic Resin Oil Samples Corresponding to Each Scheme in Cups

BLANK(Left) F103(Middle)COMPETITOR(Right)
Comparison of Compatibility of 2K PU Alkyd Resin Oil Samples Corresponding to Each Scheme in Cups

BLANK(Left) F103(Middle)COMPETITOR(Right)
Comparison of Compatibility of Solvent based 2K Amine Cured Epoxy Samples in Cups for Each Scheme

BLANK(Left) F103(Middle)COMPETITOR(Right)
In compatibility evaluations, coatings containing the additive maintained transparency comparable to the blank formulations across different resin systems, indicating good compatibility with various coating matrices.
In polyester-amino baking coatings, polyurethane acrylic systems, polyurethane alkyd systems, and epoxy coatings, the tested samples showed stable appearance without significant transparency reduction or visible surface instability.
During spray application evaluations, the additive demonstrated effective wetting and spreading behavior. In high-gloss polyurethane and UV coating systems, the coating films showed improved leveling performance with reduced surface defects such as cratering.
Additional evaluations on metal substrates indicated improved surface smoothness and image clarity compared with blank formulations and reference samples.
These results indicate that fluorine-modified polyester flow technology can improve coating surface appearance while maintaining good compatibility and formulation stability.


The effect of spraying F103 solvent based 2K PU high hydroxy acrylic high gloss topcoat and solvent based UV high gloss topcoat on PC plastic board separately
Technical Summary
Surface defects such as orange peel, craters, pinholes, and insufficient gloss are not caused by a single formulation factor. Instead, they result from the combined effects of substrate wetting, surface tension distribution, additive compatibility, and film formation behavior.
The primary function of a high-performance flow additive is not simply to increase flowability, but to regulate interfacial behavior and establish a balance between wetting capability, flow recovery, and coating stability.
Fluorine-modified polyester flow technology provides an effective approach for optimizing coating surface performance by improving substrate wetting, controlling surface tension, and enhancing leveling recovery.
For advanced coating applications, effective leveling control represents more than achieving a smoother surface. It reflects the overall optimization of coating appearance, processing stability, and final application performance.
SAF Coolest v1.3.1.2 设置面板 GQYSD-ZROR-GAZDE-AXQ
V1.3.1 SVG图标库请自行添加图标,用div包起来,并命名使用
Feedback
Quick Navigation
Contact Us
Email: k.ex@corechemie.com
WhatsApp:+86 189 2895 7890
TEL: 86-020-87223588
Address: 9th Floor, Unit 1, Building 1, 18# Runke Road, Zhongxin Town, Zengcheng District, Guangzhou, China
Copyright © 2023 Corechem Corporation Holding Co.,Ltd